Electromagnetic compatibility EMC

prove compatibilità elettromagnetica EMC

Introduction to electromagnetic compatibility EMC

1

The objective of electromagnetic compatibility is to ensure that several appliances, operating close or interconnected, continue to work properly without mutual interference.

In the EMC field, Tecnolab del Lago Maggiore Srl provides companies a full service of tests and measurements in accordance with the main European and international standards. Tecnolab carries out electromagnetic compatibility tests in accordance with European guidelines 2014/30/EU, 2007/47/CE, 2014/53/UE, 95/16/CE in compliance with following standards:

  • generic standards for appliances intended for residential environment or light industry: EN 61000-6-1 and EN 61000-6-3
  • generic standards for appliances intended for heavy industry: EN 61000-6-4 and EN 61000-6-2
  • harmonic emission: EN 61000-3-2
  • Flicker emission: EN 61000-3-3
  • equipment and methods for measuring disturbances of radiated and conducted electromagnetic fields CISPR 16

Product standards for:

  • multimedia equipment (ITE) EN 55032 and EN 55035
  • vehicles, boats and internal combustion engines – Radio disturbance characteristics: EN 55025
  • industrial, scientific and medical equipment (ISM): EN 55011
  • household appliances, electric tools and similar apparatus: EN 55014-1 and EN 55014-2
  • medical electrical equipment: EN 60601-1-2
  • electrical equipment for measurement, control and laboratory use: EN 61326
  • lifts, escalators and moving walks: EN 12015 and EN 12016
  • adjustable speed electrical power drive systems: EN 61800-3
  • equipment for general lighting purposes: EN 61547 and EN 55015
  • road traffic signal systems: EN 50293
  • railway applications: EN 50155 and EN 50121
  • uninterruptible power systems (UPS): EN 62040
  • equipment for general lighting purposes: EN 55015 and EN 61547
  • alarm systems: EN 50130-4
  • road traffic signal systems: EN 50293
  • uninterruptible power systems (UPS): EN 62040-2
  • static transfer systems (STS): EN 62310-2
  • residual current-operated protective devices (RCDs) for household: EN 61543
  • arc welding equipment: EN 60974-10
  • resistance welding equipment: EN 62135-2
  • programmable controllers: EN 61131
  • automatic electrical controls: EN 60730
  • measuring relays and protection equipment: EN 60255-26
  • general requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS): EN 50491
  • product family standard for machine tools: EN 50370-1 and EN 50370-2
  • adjustable speed electrical power drive systems: EN 61800-3
  • MIL-STD-461F: CE101, CE102, RE101, RE102, RS103 tests.

Basic standards related to immunity tests:

  • electrostatic discharge: EN 61000-4-2
  • radiated electromagnetic disturbances EN 61000-4-3
  • burst immunity: EN 61000-4-4
  • surge immunity: EN 61000-4-5
  • conducted electromagnetic disturbances: EN 61000-4-6
  • power frequency magnetic field immunity: EN 61000-4-8
  • impulse magnetic field immunity: EN 61000-4-9
  • voltage dips, short interruptions and voltage variations: EN 61000-4-11, EN 61000-4-29

We can carry out tests in accordance with other standards that refer to basic standards.

All EMC compatibility tests are preparatory for the verification of all necessary requirements for CE marking.

Equipment used during EMC electromagnetic compatibility tests

1

Radiated testing is carried out in a semi-anechoic chamber full compliance for 3 m dimension. Equipment and semi-anechoic chamber are calibrated in accordance with the reference standards CISPR 16. Tests according ETSI standards.

Management of the entire authorization process for standards FCC (Federal Communications Commission) rule 47 PART 15 and PART 18. Management of the authorization process FCC  according following procedures:

  • Verification
  • Declaration of Conformity
  • Certification

Support in filling out the relevant documentation.

Electromagnetic shielding testing: of the effectiveness of shielding of textiles, panels, gaskets, shelter and shielded rooms, cabinets, frames and subframes, varnishes etc. in accordance with following standards: MIL STD 285, IEEE 299, EN 50147-1, EN 61000-5-7, EN 61587-3. Advice on electromagnetic shieldings of shielded rooms and chambers.

Which companies is it addressed to

1

EMC compatibility testing is addressed to companies operating in the electrical and electronic sectors that need to test their products manufactured by themselves or imported from extra EU countries. Tests are carried out on civil, industrial, medical, audio/video and ITE (Information Technology Equipment) products.

Consequent actions

1

The tests allow to obtain feedbacks on conformity with regulatory requirements. In case of negative results, Tecnolab del Lago Maggiore Srl provides a step by step support helping the customer in the modification process necessary to comply with the regulatory requirements.

REQUEST THE SERVICES OF
TECNOLAB DEL LAGO MAGGIORE SRL
SEND YOUR REQUEST NOW
CONTAct Us
1
CONTACT TECNOLAB DEL LAGO MAGGIORE SRL
+39 0323 586514
Via dell’Industria, 20
28924 – Verbania Fondotoce (VB)
info@tecnolab.name