Mechanical testing

Introduction to mechanical testing

Tecnolab del Lago Maggiore Srl is provided with equipment for mechanical testing on samples and metallic, plastic and electronic components in order to define their mechanical and elastic properties: a high precision solution for static and cyclic applications also at controlled temperature.

Test on samples

Tests on unified samples are performed in order to characterize the mechanical behaviour of a material and/or of a component subjected to tractive, compression, cutting and bending efforts, searching the modulus of elasticity and/or of tensile and yield strength.

Equipment used for mechanical testing

Tecnolab has three testing machines operating at different ranges, depending on the mechanical characteristics of the tested material, with the possibility of performing mechanical tests at controlled temperature in the range -60 ÷ +200 °C.

GALDABINI CTM/60

• Maximum load: 600 kN
• Maximum test space: 1250 mm
• Test speed: 0.05 mm/min to 200 mm/min

MTS 359 25KN

• Maximum load: 25 kN
• Maximum test space: 789 mm
• Temperature control
• Torsion tests

ACQUATI AG/MC20

• Maximum load: 5 kN
• Maximum test space: 750 mm